fixing_broken_bathroom_sinkYou can delay repairs around the house as much as you can; however, there are things that you can’t and should not ignore if you want to avoid paying extra maintenance cost. One which is a broken bathroom sink.

Bathroom sinks can be stained, scratched, chipped or, worse, broken. You’ll know when the latter happens because you’ll start noticing annoying signs like the sound of dripping water to bathroom floor and a pool of water under the sink. To avoid turning the situation into something graver, it’s best that you immediately put a stop into it.

Here are the steps that you can follow in order to fix a broken bathroom sink.

Step 1:  Prepare the necessary tools.

You might or might not have the basic repairing tools at home. If you do, get them from the storage. If you don’t, you need to buy them from the nearest hardware store. They will always come in handy.

For this task, you need the following:

  • Replacement for O-strings, washers, and other parts
  • Adjustable wrench
  • Flathead screwdriver
  • Penetrating oil

Step 2: Turn off the water supply.

You don’t want to make the mistake of repairing the sink while the water is flowing. It could be disastrous. That’s why you need to make sure that you’ve switched off the water supply to the toilet. If the sink does not have its own water valve, turn off the supply using the main switch.

Step 3: Remove parts of the handle knob.

You can now remove any decorative parts and screws that are mounted on the handle knob. Use your flathead screwdriver in doing so. If you find it difficult, you might want to use a penetrating oil to loosen them a little.

Step 4: Loosen the packing nut.

Since you need to be able to inspect the stem, you need to loosen the packing nut first. Do this using an adjustable wrench. Once you see the stem, remove it as well.

Check all the removed parts and see if any of them is damaged. If they are, it’s best that you replace them with new ones. If none of them have cracks or holes, then proceed to the next step.

Step 5: Inspect the washer or O-ring.

When the stem, bolts, and nuts are in good conditions, then there might be something wrong with the washer or O-string. Remove the damaged part and replace it with a new one. It’s crucial that the washer and O-string you bought exactly fits the seat.

If you’re not sure whether you’re doing the right thing or not, you might want to ask assistance from professionals at this point. Contact expert Plumber Mosman.

Step 6: Reassemble the parts.

Once replacement of the new part is successful, you can reassemble all the parts that you have removed. Make sure that you secure all of them tightly.

Final Words

Fixing a broken bathroom sink may not be difficult; however, if you doubt your skills in repairing it, the best choice is to seek professional help.

Leave a Reply

Your email address will not be published. Required fields are marked *