5 Common Garage Door Problems

garage door

Some common problems with garage doors are related to the safety system. If your garage door is not closed correctly, you might experience the following issues. The photo-eyes in your garage may become dirty. This can interfere with the signal and cause the door to not close. You must use a soft cloth and a non-abrasive agent to remove dirt.

Misalignment of tracks

A misaligned track may be the cause of a malfunctioning garage door. Tracks can become bent or worn after thousands of operations. Contact a professional technician to learn more about how to fix this problem. Regular maintenance will help prevent misalignment and can also keep the garage door in a functional condition. Without regular maintenance, rust may accumulate on the track.

A large object can knock the tracks out of alignment. A big thing can cause the door to become off balance and pop out of its track. When this happens, the stress on the tracks increases, and the door begins to bend and warp. The tracks may also have become caked with debris or grime. Clean them and add lubricant to prevent further damage. Some dents or bumps may be easily worked out with a woodblock. Other problems may require the replacement of the entire track.

Broken torsion springs

If your garage door is not opening or closing correctly, one of the torsion springs is likely broken. This can be an alarming situation. If you’re home when your garage door is malfunctioning, it might be time to call a garage door repair service. This will ensure that your door is fixed correctly and can be safely used again. A garage door with a broken torsion spring is not a good idea.

Broken torsion springs unwind at their breaking point, leaving a two-inch gap in the garage. Because they no longer retain energy, they need to be replaced. Garage doors rely on even spring tension, so if one spring breaks, it’s time to call a professional. A broken torsion spring will cause the garage door to act unpredictably.

Damaged cables

The cables will likely be damaged if your overhead door is stuck in the open position. The cables distribute the door’s weight unevenly, resulting in slack that can cause them to slip out of their grooves. Ultimately, damaged cables will fall to the ground, causing the door to malfunction and potentially cause injury. A cable inspection is essential to prevent these issues from recurring.

A broken cable can also cause a door to fall out of track and stop working properly. Broken cables can also make the door noisy. Damaged cables may also lead to an unbalanced garage door, which can cause the opener to fail prematurely. Because cables and springs work together to lift and lower the garage door, they should be checked and replaced whenever necessary. Frayed cables are often the culprit of the imbalance that can cause a garage door to malfunction.

Rusty rollers

The garage door’s rollers are essential to the smooth and quick movement of the door. Unfortunately, they can become worn out, loose, and damaged over time. This can result in grinding noises and violent vibrations when the door moves. Ultimately, a faulty cable or broken spring can cause the door to crash and injure you or a loved one. Approximately 20,000 emergency room visits are related to malfunctioning garage doors each year. Luckily, there are easy fixes to many of the most garage door repairs.

If the garage door is prone to binds and jams, it may be due to worn or rusted rollers. A silicone lubricant can solve the issue if these rollers are damaged or rusted. Another problem could be a damaged track. This can cause the door to be off track, causing the rollers to come out of their housing. If you notice these problems, contact a garage door repair specialist to take care of them.

Sluggish movement

A slow-moving garage door could be an indication of a severe problem. For example, it could have worn-out rollers or a broken spring. In this case, you’ll want to get a professional repair technician to address the issue.Changing these settings can prevent further damage and inconvenience. However, you might need to call a technician if the problem persists.

A garage door’s tracks may need to be lubricated. This lubricant can help prevent excessive noise by reducing friction between the springs and tracks. You should also consider applying penetrating oil to the ways, starting at one foot from the curve. Then, you should open and close the door several times to distribute the oil evenly across the tracks. This is especially important if your garage door has nylon rollers.

Recommended Articles